FD Series – Type B Galvanised Steel Blades Out of Airstream – Cleats – FD-B-G-CL – BSB

FD Series – Type B Galvanised Steel Blades Out of Airstream – Cleats – BSB

The FD Series curtain blade Fire dampers are suitable for use in dryline walls and masonry/concrete walls and floors and cavity barriers and is independently 3rd party tested and certified to the following standards:

• Fire resistance tested to BS EN 1366-2.
• E classified to BS EN13501-3.
• CE marked to BS EN 15650 The fully welded fire damper case meets the air tightness test requirements of HVCA.
• Fully welded damper casing leakage Class C to BS EN 1751. Normal operating conditions to a maximum of 1000Pa.
• Available in galvanised or stainless steel construction in rectangular, circular or flat oval spigot configurations.
• Tested horizontal and vertical options, with with four frame variations to suit varying applications.
• Available in sizes from 100mm wide x 100mm high up to 1200mm wide x 1000mm high in single section.
• Tested multi-sections on width and height available with angle frame fixing.
• For the protection of escape routes and areas with sleeping risk, the FSD-TD damper should be used. Please refer to Approved Document B(ADB).

For sizes over 1200 wide and 1000 high, please refer to our Sales Office for prices.
Cleats: 2 off BSB factory fitted cleats will be required to maintain fire test certification. These are not included in the above prices.

Product Data Sheet:

FD Series Data Sheet